Home / Uncategorized (Page 5)
Uncategorized
Page 5 of 8
X
ITT Allis Chalmers type 9000 size 16×12-23 Pump
Product ID:
P12974
Manufacture : ITT Allis ChalmersType : 9000Size : 16×12-2320.1" Impeller Diameter 6500 gpm 152 ft HD 1170 rpm Frame : F21E1
Product id: P12974
Description: ITT Allis Chalmers pump, type 9000 size 16x12x23
X
Jetcooker valve with Fisher actuator and positioner!
Product ID:
PTM11656
Contact us for more information! +1(612)810-1955 USA +52(614)169-3217 Mexico manufacture
Product id: PTM11656
Description: Jetcooker valve with Fisher Pneumatic Actuator and Positioner 4-20mA, used..
X
Klaus Union SLM HVO 125-065-250/4-19E14 G Carboxylator Feed Pump, New Storeroom Spare
Product ID:
PM13257
Manufacture : Klaus UnionS/N : sn0080671Q : 305.02 gpmH : 1709.02 ftp : 65.55 lb/ft3Dmax : 10.24inn : 3550 rpmD2 : 10.24inYear : 2018MAWP : 913 psi/392FTest Pressure : 1369.5 psi/68F
Product id: PM13257
Description: New Storeroom Spare Klaus Union Carboxylator Feed Pump
X
KMT Pressure Intensifier, Part Number 72122420, New Storeroom Spare
Product ID:
PM12260
Manufacture : KTMPart No. 72122420
Product id: PM12260
Description: KMT Pressure Intensifier, Part Number 72122420, New Storeroom Spare
X
KMT WaterJet HP Cylinder 1; New Storeroom Spare
Product ID:
PM12489
Manufacture : KMT WaterJetSales Order# 04090516 Internal Job # 63999986-1 HP Cylinder 1 Serial Number : 63770893-1Seal Head 1 : 64001633-19
Product id: PM12489
Description: New Storeroom Spare KMT WaterJet HP Cylinder 1
X
Krima KD-710 Dispersion System
Product ID:
PC12478
This system Includes 3 basic zones : a dewatering zone, heating zone and the disperserKRIMA DISPERSER TYPE KD-710 Features Electro-Hydraulic disc setting (servo-controlled plate gap adjustment) Hydraulic System – built in to open and close disperser for maintenance and inspection, providing critical lubrication for baring assemblies, and controlling plate gap via remote operating panel. These pumps are located in the motor base along with a hydraulic reservoir. Safety switches and oil filters also located inside base. Headbox level detection- Ensures consistent flow of material through Disperser (2)Dilution Ports feeds the housing Disperser Motors Specs 600HP/1780RPM/4160v KRIMA DEWATERING INCLINED SCREW TYPE SD-2040 Qty (2) Inclined and Tapered Dewatering Screw KRIMA SCREW PRESS TYPE RR 550 Horizontal Screw Press- pneumatically regulated counter pressure cone (choke) and conical screw core Capable of producing and outlet consistency of up to 35% and inlet consistency should be a minimum of 4% based on feedstock KRIMA PLUG SCREW TYPE 3823 Allows for a closed system and low steam consumption – Used to seal the heating zone KRIMA SHREDDER TYPE 400 Transforms the pulp plug to from the plug screw into "crumbs" for even heating as it is entered into the preheater stage KRIMA PREHEATER TYPE 8050 Auger for preheating pulp through saturated steam to reach desired temperature setpoint. Steam injection ports run the length of this component. KRIMA INFEEDER TYPE 350 Provides even distribution and consistent feed as pulp enters the disperser For more info call us (612)810-1955 USA; +52(614)169-3217 Mexico manufacture
Product id: PC12478
Description: Krima KD-710 Dispersion System
X
Loading Device Sunds KHA04212JC04
Product ID:
PM11104
Contact us for more information! manufacture
Product id: PM11104
Description: Loading Device Sunds KHA04212JC04
X
Mac HD 16×12 Rotary Air Lock New Storeroom Spare
Product ID:
PM13267
Manufacture : MACRA# 38451 Model : HD 16×123 HP
Product id: PM13267
Description: New Storeroom Spare MAC HD16x12 Rotary Airlock with 3hp, 1170rpm..
X
Module Replacement Mist Eliminator For Agilis TE
Product ID:
PM13089
Agilis Technologies Model : HF3-1316LSSmanufacture
Product id: PM13089
Description: Contact us for more information!
X
Nash Vacuum Pump model 904 T1
Product ID:
PT12202
Nash Vacuum Pump 904T1 Test No. 88S0211 Pos. 4 277 rpm manufacture
Product id: PT12202
Description: Nash Vacuum pump model 904T1, 277rpm, pos. 4
X
OEM Rader 30×40 Feeder New Storeroom Spare
Product ID:
P12865
Manufacture : OEM RaderSize : 30" x 40"
Product id: P12865
Description: New Storeroom Spare OEM Rader 30x40 Feeder
X
Precision 20×20 Feeder New Storeroom Spare
Product ID:
PM13295
Manufacture : PrecisionSize : 20" x 20"Rotation : RH/CCWS/N : 5639
Product id: PM13295
Description: New Storeroom Spare Precision 20x20 Feeder
