Lorentzen & Wettre tensile tester
Product ID: PM12643
- Manufacture: Lorentzen & Wettre
- Type: Tensile Tester
Lorentzen & Wettre tensile tester type 971481, Code 062, No. 313
Product PDF:
Related Products
- Manufacture: Messmer Buchel
- Serial Number: 01412
- Contact us for more information!
- manufacture
- Manufacture: IEC
- Model: K
- Hp: 3/4
- Hz: 60
- Volts: 115
- Amps: 7
- The IEC model K floor model centrifuge is a heavy duty, large capacity machine designed for high speed with constant or intermittent use. The IEC model K is a G-testing machine designed for use by the electronic Industry. Designed for production sampling and research.
- Features
- An automatic timer
- Dynamic electric braking
- Swivel casters to permit easy mobility
- Precise run times from 2 to 120 minutes in 2-minute increments
- A manual mode for unlimited runs, via use of the timer
- Gentle deceleration which cuts coasting time in half and help prevent resuspension
- Steel cabinet has removable access plates and four locking swivel casters
- Operating speeds range from 1,200 to 5,500 rpm
- 380xG to 4,420xG respectively, depending on the heads and shields used.
- Manufacture: IEC
- Model: HN-SII
- Manufacture: Lorentzen & Wettre
- Type: Tensile Tester
- ISO Brightness
- Providing outstanding performance even in the most hostile pulp, paper, and clay mill environments, the Technibrite TB-1 is the industry leader for measuring and controlling ISO brightness. With strict adherence to industry standards, this no-nonsense testing device is economical and user-friendly.
- Automatic push-button calibration.
- Precise filter selection.
- Internal voltage stabilization.
- Computer interfacing.
- Meets the following industry standards
- TAPPI Test Methods T525, T534
- ISO Standards 2469, 2470, 2471, 3688,12625
- manufacture
- Manufacture: Herzog
- Model: HTP40
- The standard for pellet preparation- designed for requirements of laboratory operations
- AREA OF APPLICATION
- Use
- Preparation of pellets in steel rings (40 or 51. 5 mm diameter), aluminium cups or free pressing for x-ray fluorescence spectroscopy
- Material
- Different materials, raw meal, clinker, cement, slag, ores, oxidic material, ferroalloys (feed size 100µm)
- Operation mode
- Semi-automatic
- ADVANTAGES
- Optimized for laboratory operations
- The HERZOG pellet press HTP offers the full benefits of program-controlled sample preparation for x-ray fluorescence analysis. Pelletizing with the HERZOG HTP significantly increases reproducibility and accuracy of sample preparation. The HTP pellet press is a high-quality, precision engineering product with compact dimensions. It is ideally suited for laboratory requirements.
- Optimum quality of pressed pellets
- The HERZOG hydraulic HTP press produces high-quality pressed pellets with a mirrorlike surface necessary for optimal XRF results. The HSM achieves the desired homogeneity and stability of each individual pellet with a maximum of reproducibility. The HTP 40 reaches press forces of 400 kN, the HTP 60 of up to 600 kN even with larger sample diameters.
- Easy handlingA swing-out cross-head makes filling and cleaning of the die quick, simple and safe. A number of pressing variables can be selected, depending on the press tool employed. Precision press tools with a range of diameters and materials permit free pressing, pressing in aluminum shells, and pressing in steel rings.
- Precise control of the pelletizing process
- The pelletizing process of the HTP is controlled by the PLC program. This leads to substantial improvement in reproducibility of sample preparation and consequently more precise analysis results. Pelletizing parameters such as total pressing force, incremental increase and decrease of pressure as well as pressure holding time can be preset on the HMI panel. The pressure increase and decrease during pelletizing are controlled to reduce inner stresses within the sample. This allows the production of perfect pellets even with complicated sample material.
Messmer Buchel M113500 Pulp and Sheet making tester
X
Messmer Buchel M113500 Pulp and Sheet making tester
Product ID: PM12644
Product id: PM12644
Description: Manufacture: Messmer BuchelSerial Number: 01412TMI 32-06 Friction Tester
Product id: PM12307
Description: Manufacture: TMI Testing Machines IncModel: 32-06Laboratory Testing Roller 9-3/4″ x 5-7/8″
X
Laboratory Testing Roller 9-3/4″ x 5-7/8″
Product ID: PT12823
Product id: PT12823
Description: Contact us for more information!manufactureInternational Equipment Company – IEC – model K Centrifuge, 3/4 hp
X
International Equipment Company – IEC – model K Centrifuge, 3/4 hp
Product ID: PT8825
Product id: PT8825
Description: Manufacture: IECModel: KHp: 3/4Hz: 60Volts: 115Amps: 7The IEC model K..IEC / International Equipment Company model HN-SII Centrifuge
X
IEC / International Equipment Company model HN-SII Centrifuge
Product ID: P9424
Product id: P9424
Description: Manufacture: IECModel: HN-SIILorentzen & Wettre tensile tester
X
Lorentzen & Wettre tensile tester
Product ID: PM12308
Product id: PM12308
Description: Manufacture: Lorentzen & WettreType: Tensile TesterTechnibrite TB-1 Economical and Easy to Use ISO Brightness Tester
X
Technibrite TB-1 Economical and Easy to Use ISO Brightness Tester
Product ID: PT9015
Product id: PT9015
Description: ISO BrightnessProviding outstanding performance even in the most hostile pulp,..Herzog HTP40 Semi-Automatic Pellet Press
X
Herzog HTP40 Semi-Automatic Pellet Press
Product ID: PM13177
Product id: PM13177
Description: Manufacture: HerzogModel: HTP40The standard for pellet preparation- designed for requirements..